- Stock: In Stock
- Model: FTO
- MPN: FTO-18
Match Lit
Match lit burners are available in natural gas only. They are lit by turning the gas flow on with your key valve and tossing a match or an equivalent flame source near the burners gas supply. You can control the flame height by adjusting your key valve.
Manual Valve Standing Pilot
This features a safety pilot light that is lit and remains on constantly. To turn on the burner, you would turn the control knob to allow for a heavier gas flow. This knob can also be used to control the flame height.
Basic on/off remote
This control type includes a safety pilot, a remote and a remote receiver. The remote has the ability to turn the flame on and off while keeping the pilot lit. There is no way to adjust the flame height in intervals.
Basic on/off Remote Variable Flame
This control type includes a safety pilot, a remote and a remote receiver. The remote has the ability to turn the flame on and off while keeping the pilot lit. Both the remote and the knobs on the valve can adjust the flame height.
Basic on/off RemoteLow Profile, Variable Flame
The only differences between this control type and Basic On/Off Remote, Variable Flame is that it is smaller and lower to the ground, and does not include a decorative cover.
Basic on/off RemoteElectric, Variable Flame
This features a non standing pilot with electric ignition. The pilot is ignited electrically via the remote, which then ignites the burner. When it is lit, the pilot goes out. The remote and remote receiver are battery operated, and there is no way to adjust the flame height.
Basic on/off RemoteElectronic, Variable Flame
The only difference between this control type and Electric Basic On/Off Remote is that the flame height is controllable via the remote.
G4 Burner
The G4 is an entry level burner, with a single pipe running left to right. It is available from 12-60 inches, and is compatible with most Real Fyre logs.
| Model | Minimum Fireplace Size — Match-Lit (Nat. Gas Only) | Minimum Fireplace Size — With Safety Pilot Kit ▲ | BTU Rating | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| G4-12 | 16" | 12" | 11" | 15" | 21" | 19" | 11" | 15" | 25k | 25k |
| G4-16/19 (16" log set) | 19" | 16" | 11" | 17" | 26" | 22" | 11" | 17" | 39k | 39k |
| G4-16/19 (19" log set) | 22" | 17" | 11" | 17" | 26" | 22" | 11" | 17" | 39k | 39k |
| G4-18/20 | 24" | 18" | 13"♦ | 17" | 29" | 25" | 13"♦ | 17" | 75k | 50k |
| G4-24 | 28" | 23" | 13"♦ | 17" | 34" | 29" | 13"♦ | 17" | 90k | 65k |
| G4-30 | 34" | 27" | 14"♦ | 17" | 39" | 34" | 14"♦ | 17" | 90k | 65k |
| [G4-36] | 40" | 34" | 15" | 17" | 46" | 39" | 15" | 17" | 120k | 90k |
| [G4-42] | 46" | 40" | 20" | 17" | 51" | 45" | 20" | 17" | 130k | 110k |
| [G4-48] | 53" | 45" | 20" | 17" | 58" | 52" | 20" | 17" | 145k | 115k |
| [G4-60] | 64" | 56" | 20" | 17" | 69" | 63" | 20" | 17" | 150k | 120k |
* These required widths allow for centering of the unit.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
♦ Add 1"; to depth when using heavy duty grate.
[] Bracketed models indicate non-listed models.
▲ For Nat. gas models, a safety pilot kit is optional. For L.P. models, a kit is required (use the included SPK-26P, or an optional kit).
Note: Table 3 dimensions apply for all safety pilot kits.
G45 Burner
The G45 has the same single pipe as the G4 burner, but has an additional "T" shaped extra front pipe that provides more flame depth and realism. It provides more warmth than the G4, is compatible with most Real Fyre logs. It can come ANSI certified or listed, and also has variations as a glass, stainless steel, and a see-through burner.
| Model | Minimum Fireplace Size | BTU Rating | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| G45-16/19 | 29" | 22" | 11" | 17" | 40k | 30k |
| G45-18/20 | 30" | 24" | 13" | 17" | 70k | 45k |
| G45-24 | 34" | 28" | 13" | 17" | 90k | 65k |
| G45-30 | 40" | 34" | 16" | 17" | 95k | 75k |
| G45-36 | 46" | 40" | 16" | 17" | 110k | 90k |
* These required widths allow for centering of the unit. For valve models, add 2" to both front and rear width.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
| Model | Minimum Fireplace Size | BTU Rating | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| G45-16/19-SS | 29" | 23" | 11" | 18" | 40k | 30k |
| G45-18/20-SS | 30" | 24" | 14" | 18" | 70k | 45k |
| G45-24-SS | 34" | 28" | 14" | 18" | 90k | 64k |
| G45-30-SS | 40" | 34" | 15" | 18" | 95k | 75k |
| G45-36-SS | 46" | 40" | 16" | 18" | 95k | 75k |
| [G45-42-SS] | 52" | 46" | 20"1/2 | 18" | 130k | 110k |
| [G45-48-SS] | 58" | 52" | 20"1/2 | 18" | 145k | 110k |
| [G45-60-SS] | 70" | 64" | 20"1/2 | 18" | 150k | 120k |
* These required widths allow for centering of the unit.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
Note: Stainless steel burners are designed for outdoor use and are match-lit only.
| Burner Size | Minimum Fireplace Dimensions | Height | BTU Rating | |||
|---|---|---|---|---|---|---|
| Width* | Depth | Nat. Gas | L.P. Gas | |||
| 16/19" | 29" | 15" | 17" | 50k | 35k | |
| 18/20" | 30" | 17" | 17" | 85k | 60k | |
| 24" | 34" | 17" | 17" | 105k | 70k | |
| 30" | 40" | 17" | 17" | 110k | 90k | |
| 36" | 46" | 22" | 17" | 110k | 90k | |
| [42"] | 52" | 22" | 17" | 150k | 140k | |
| [48"] | 58" | 22" | 17" | 170k | 160k | |
| [60"] | 70" | 22" | 17" | 190k | 200k | |
* This required width allows for centering of the log set.
Note: Bracketed sizes indicate non-certified models.
| Burner Size | Minimum Fireplace Dimensions | BTU Rating | |||
|---|---|---|---|---|---|
| Width* | Depth | Height | Nat. Gas | L.P. Gas | |
| 16/19" | 26" | 14" | 18" | 45k | 30k |
| 18" | 28" | 14" | 18" | 75k | 55k |
| 24" | 34" | 14" | 18" | 85k | 65k |
| 30" | 40" | 14" | 18" | 95k | 70k |
| 36" | 46" | 18" | 18" | 100k | 70k |
| [42"] | 52" | 18" | 18" | 130k | 120k |
| [48"] | 58" | 18" | 18" | 150k | 130k |
| [60"] | 70" | 18" | 18" | 170k | 140k |
* This required width allows for centering of the log set.
Note: Bracketed sizes indicate non-certified models.
| Model | Minimum Fireplace Size | BTU Rating | |||
|---|---|---|---|---|---|
| Width* | Depth† | Height | Nat. Gas | L.P. Gas | |
| G45-2-16/19 | 29" | 15" | 17" | 50k | 35k |
| G45-2-18/20 | 30" | 17" | 17" | 85k | 60k |
| G45-2-24 | 34" | 17" | 17" | 105k | 70k |
| G45-2-30 | 40" | 17" | 17" | 110k | 90k |
| G45-2-36 | 46" | 22" | 17" | 110k | 90k |
* This required width allows for centering of the unit. For 02 models, add 2" to width.
† If an ash lip exists, the depth requirement begins inside of the lip.
| Burner Size | Min. Fireplace Dimensions | BTU | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear) | Depth | Height | NAT. | L.P. | |
| 16/19" | 26" | 20" | 12" | 18" | 35k | 28k |
| 18" | 28" | 22" | 12" | 18" | 65k | 40k |
| 24" | 34" | 28" | 12" | 18" | 75k | 60k |
| 30" | 40" | 34" | 12" | 18" | 85k | 70k |
| 36" | 46" | 40" | 12" | 18" | 95k | 80k |
| [42"] | 52" | 46" | 12" | 18" | 105k | 90k |
| [48"] | 58" | 52" | 12" | 18" | 110k | 95k |
| [60"] | 70" | 64" | 12" | 18" | 120k | 105k |
* This required width allows for centering of the log set.
Note: Rear width is at corresponding depth. Bracketed sizes indicate non-certified models.
| Model | Minimum Fireplace Size | BTU Rating | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| G45-GL-16/19 | 26" | 23" | 12" | 16" | 35k | 28k |
| G45-GL-18 | 29" | 26" | 12" | 16" | 65k | 40k |
| G45-GL-24 | 34" | 30" | 12" | 16" | 75k | 50k |
| G45-GL-30 | 39" | 35" | 12" | 16" | 85k | 70k |
| G45-GL-36 | 46" | 40" | 12" | 16" | 95k | 80k |
* These required widths allow for centering of the unit. For 02 models, add 2" to both front and rear width.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
G46 Burner
The G46 has the same flame as the G45. Its angled design hides the valve, creating more space for a larger burner. This burner only comes ANSI certified, and is compatible with most logs. The G46 is our recommended vented Real Fyre burner.
| Model | Minimum Fireplace Size | BTU Rating | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| G46-18/20 | 26" | 20" | 15" | 17" | 40k | 40k |
| G46-24 | 30" | 24" | 15" | 17" | 55k | 55k |
| G46-30 | 36" | 29" | 15" | 17" | 65k | 65k |
* These required widths allow for centering of the unit. For valve models, add 6" to front width and 4" to rear width.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
G31 Burner
The G31 has 3 pipes running across the burner, creating the tallest and most full-bodied flame of any other Real Fyre burner. It provides more warmth than the G4, G45 and G46. It can come ANSI certified or match lit.
| Model | Dimensions | BTU Rating | ||||||
|---|---|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas (High) | Nat. Gas (Low)▲ | L.P. Gas (High) | L.P. Gas (Low)▲ | |
| G31-18/20 (18" log set) | 28" | 22" | 16" | 17" | 55k | 20k | 40k | 21k |
| G31-24/30 (24" log set) | 34" | 25" | 16" | 17" | 65k | 21k | 50k | 22k |
| G31-24/30 (30" log set) | 36" | 27" | 16" | 17" | 65k | 21k | 50k | 22k |
| G31-33/39 (33" log set) | 39" | 30" | 16" | 17" | 75k / 85k • | 22k | 60k | 23k |
| G31-33/39 (39" log set) | 41" | 32" | 16" | 17" | 75k / 85k • | 22k | 60k | 23k |
* These required widths allow for centering of the unit. For valve models, add 2" to both front and rear width.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
▲ Valve models only.
• 2VT models only.
G52 Burner
The G52 features 2 pipes running across the burner and a stainless steel "booster grid" that acts as a catalyst to create a more intense flame. It provides more heat than any other burner. The controls are positioned under the burner, creating more space for a larger burner. It can come ANSI certified or match lit.
| Model | Minimum Fireplace Size | BTU Rating | ||||||
|---|---|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas (High) | Nat. Gas (Low)▲ | L.P. Gas (High) | L.P. Gas (Low)▲ | |
| G52-18/20 (18" log set) | 28" | 20" | 15" | 17" | 46k | 33k | 36k | 27k |
| G52-24/30 (24" log set) | 32" | 24" | 15" | 17" | 55k | 37k | 46k | 26k |
| G52-24/30 (30" log set) | 34" | 28" | 15" | 17" | 55k | 37k | 46k | 26k |
* These required widths allow for centering of the unit. For valve models, add 2" to both front and rear width.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
▲ 2VT models only
| Model | Minimum Fireplace Size | BTU Rating | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| G52-18/20 (18" log set) | 28" | 20" | 15" | 17" | 46k | 36k |
| G52-24/30 (24" log set) | 32" | 24" | 15" | 17" | 55k | 46k |
| G52-24/30 (30" log set) | 34" | 28" | 15" | 17" | 55k | 46k |
* These required widths allow for centering of the unit.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
P45 Burner
The P45 has the same "T" burner design as the G4, G45, and G46. It can be used with certain logs, glass, or shapes.
| Model | Minimum Fireplace Size | BTU Rating | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| P45-18 | 25" | 19" | 16" | 17" | 43k | 36k |
| P45-24 | 31" | 25" | 16" | 17" | 65k | 55k |
| P45-30 | 37" | 31" | 16" | 17" | 84k | 70k |
* These required widths allow for centering of the unit.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
Pan Burner
The pan burner is designed to allow flames to cover the entire pan. It is ideal for see thru peninsula or island fireplaces. It can come ANSI certified or listed, and can be used with certain logs, glass, or shapes.
| Burner Model | Minimum Fireplace Size | BTU Rating | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| PB-18 | 33" | 29" | 16" | 17" | 75k | 60k |
| PB-24 | 39" | 35" | 16" | 17" | 90k | 75k |
| PB-30 | 45" | 41" | 16" | 17" | 110k | 90k |
* These required widths allow for centering of the unit.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
Epic Burner
The epic burner is ideal for commercial applications, such as a restaurant or hotel. It is only compatible with the mammoth pine log set.
| Model | Minimum Fireplace Size | BTU Rating | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| EC-36 | 48" | 41" | 18" | 36" | 100k | 100k |
| EC-48 | 62" | 56" | 24" | 36" | 145k | 145k |
| EC-60 | 72" | 65" | 24" | 36" | 260k | 190k |
* These required widths allow for centering of the unit.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
| Model | Minimum Fireplace Size | BTU Rating | |||
|---|---|---|---|---|---|
| Width* | Depth† | Height | Nat. Gas | L.P. Gas | |
| EC-2-36 | 48" | 24" | 36" | 190k | 180k |
| EC-2-48 | 62" | 24" | 36" | 215k | 190k |
| EC-2-60 | 72" | 24" | 36" | 260k | 190k |
* This required width allows for centering of the unit.
† If an ash lip exists, the depth requirement begins inside of the lip.
G8E Vent-Free Burner
Compact vent-free burner for small fireboxes, paired with Valley Oak or Split Valley Oak logs. Offered in 16", 20", and 24" sets. Standard output is 20,000 BTUs; bedroom-rated models are 9,500 BTUs. Includes lava granules and embers; multiple control options available.
| Model / Size | Minimum Fireplace Size | BTU Rating | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| G8E-16 | 17" | 13" | 9 1/2" | 17" | 20k | 20k |
| G8E-20 | 21" | 13" | 9 1/2" | 17" | 20k | 20k |
| G8E-24 | 26" | 13" | 9 1/2" | 17" | 20k | 20k |
* These required widths allow for centering of the unit.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
Note: Variable-flame -15 models can reduce to 7.5k BTUs (NG/LP). ON/OFF -12 models are fixed at 20k BTUs.
| Model / Size | Minimum Fireplace Size | BTU Rating | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| G8E-16R | 17" | 13" | 9 1/2" | 17" | 9.5k | 9.5k |
| G8E-20R | 21" | 13" | 9 1/2" | 17" | 9.5k | 9.5k |
| G8E-24R | 26" | 13" | 9 1/2" | 17" | 9.5k | 9.5k |
* These required widths allow for centering of the unit.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
Note: Bedroom use where permitted by code. Bedroom-rated output is 9,500 BTUs (NG/LP).
G9 Vent-Free Burner
Traditional vent-free ember burner with a reflective panel for added visual depth. Pairs with Golden Oak Designer, Split Oak, and Meadow Oak logs; includes lava granules, Bryte Coals, and embers.
| Model / Size | Minimum Fireplace Size | BTU Rating | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| G9-20 | 28" | 24" | 14" | 17" | 36k | 36k |
| G9-24 | 32" | 24" | 14" | 17" | 36k | 36k |
| G9-30 | 36" | 28" | 14" | 17" | 36k | 36k |
* Based on minimum depth.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
Low setting (21k BTUs) is available on -15 variable models (Nat. Gas only).
| Model | Minimum Fireplace Size | BTU Rating | |||
|---|---|---|---|---|---|
| Width* | Depth | Height | Nat. Gas | L.P. Gas | |
| G9-2-24-12 | 28" | 18" | 17" | 39k | 39k |
* This required width allows for centering of the unit. If an ash lip exists, begin depth inside the lip.
G10 Vent-Free Burner
The G10 burner features a burnt-through front log design, producing lively flames and a deep ember bed with Bryte Coals. Available in 16/18" and 24/30" sizes, this vent-free system is paired with Real Fyre Charred Series log styles, offering efficient heat and a natural wood fire appearance. Lava granules, glowing embers, and Bryte Coals come standard.
| Model | Minimum Fireplace Size | BTU Rating | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| G10-16/18 | 26" | 20" | 12" | 17" | 35k | 32k |
| G10-24/30 | 34" | 28" | 14" | 17" | 37k | 37k |
* These required widths allow for centering of the unit.
† Rear width is measured at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
G18 Vent-Free Burner
Ember burner for Evening Fyre log collections, offered in 16/18" and 24/30" sets. Includes lava granules, glowing embers, Bryte Coals, and wood chunks for a deep, natural fire bed.
| Model | Minimum Fireplace Size | BTU Rating | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| G18-16/18 | 24" | 20" | 14" | 17" | 30k | 30k |
| G18-24/30 (24" log set) | 30" | 24" | 14" | 17" | 38k | 38k |
| G18-24/30 (30" log set) | 36" | 26" | 14" | 17" | 38k | 38k |
* Based on minimum depth.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
Note: Low setting (approx. 22k BTUs on 16/18"; 25k BTUs on 24/30") is available only on 01V & 15 models.
| Model | Minimum Fireplace Size | BTU Rating | |||
|---|---|---|---|---|---|
| Width* | Depth | Height | Nat. Gas | L.P. Gas | |
| G18-2-16/18 | 22" | 18" | 17" | 39k | 39k |
| G18-2-24 | 26" | 18" | 17" | 40k | 40k |
* Required width allows for centering of the unit. If an ash lip exists, begin depth inside the lip.
Note: Low setting (approx. 29k BTUs) is available only on 15 models.
G19A Burner
The Real Fyre G19A Vent-Free Burner is engineered for use with Foothill Oak and Foothill Split Oak gas logs, producing a natural flame pattern with glowing embers. This system offers advanced performance in both 18/20” and 24/30” sizes, with variable flame height controls and multiple ignition options. Designed for use in vent-free approved fireboxes, the G19A provides dependable heat and a lifelike presentation with RH Peterson quality.
| Model | Minimum Fireplace Size | BTU Rating | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| G19A-18/20 | 24" | 22" | 14" | 17" | 27k–34k | 26k–30k |
| G19A-24 | 30" | 24" | 14" | 17" | 30k–40k | 26k–36k |
| G19A-30 | 34" | 26" | 14" | 17" | 30k–40k | 26k–36k |
* Width values based on minimum depth.
† Rear width is measured at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
Note: Low setting is only available on 01V & 15 models.
G21 Vent-Free Contemporary Burner
The Real Fyre G21 Vent-Free Contemporary Burner is a stainless steel system designed for modern fireplace designs. It pairs beautifully with Fyre Glass, Gems, or Diamond Nuggets, producing tall flames that dance across the media bed. Available in 18”, 24”, and 30” sizes, the G21 brings sleek style and strong heat performance to vent-free approved fireplaces.
| Model | Minimum Fireplace Size | BTU Rating | ||||
|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas | L.P. Gas | |
| G21-GL-18 | 22" | 16" | 13" | 17" | 30k | 27k |
| G21-GL-24 | 28" | 21" | 13" | 17" | 35k | 30k |
| G21-GL-30 | 34" | 28" | 13" | 17" | 40k | 35k |
* Based on minimum depth.
† Rear width is measured at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
| Model | Minimum Fireplace Size | BTU Rating | |||
|---|---|---|---|---|---|
| Width* | Depth | Height | Nat. Gas | L.P. Gas | |
| G21-GL-2-18 | 22" | 16" | 17" | 37k | 35k |
| G21-GL-2-24 | 28" | 16" | 17" | 40k | 40k |
* Width based on minimum depth.
Note: Low setting is not available on all models.
ODG15 Outdoor Vent-Free Burner
Stainless steel vent-free system engineered for outdoor rooms. Available for 24" and 30" log sets with strong heat output and variable flame on 2VT models. Requires adequate outdoor ventilation and a wood-burning or listed vent-free enclosure.
| Model | Minimum Fireplace Size | BTU Rating | ||||||
|---|---|---|---|---|---|---|---|---|
| Width (Front)* | Width (Rear)† | Depth‡ | Height | Nat. Gas (High) | Nat. Gas (Low)§ | L.P. Gas (High) | L.P. Gas (Low)§ | |
| ODG15-24/30 (for 24" log set) | 35" | 16" | 16" | 17" | 55k | 24k | 45k | 22k |
| ODG15-24/30 (for 30" log set) | 39" | 32" | 16" | 17" | 55k | 24k | 45k | 22k |
* These required widths allow for centering of the unit.
† Rear width is at corresponding depth.
‡ If an ash lip exists, the depth requirement begins inside of the lip.
§ Low setting available on 2VT models only.
Note: Stainless steel ODG15 burners are designed for outdoor use.
