ANSI
ANSI burners are preassembled at the factory with the valve attached.
Listed
Listed burners are not pre-assembled and require a licensed gas plumber to attach the valve (if necessary).
See-Thru
See-Thru burners are two-sided burners made for see-through applications.
Stainless Steel
Stainless steel burners are manufactured for usage in outdoor applications.
G4 Burner
The G4 is an entry level burner, with a single pipe running left to right. It is available from 12-60 inches, and is compatible with most Real Fyre logs.
G45 Burner
The G45 has the same single pipe as the G4 burner, but has an additional "T" shaped extra front pipe that provides more flame depth and realism. It provides more warmth than the G4, is compatible with most Real Fyre logs. It can come ANSI certified or listed, and also has variations as a glass, stainless steel, and a see-thru burner.
G46 Burner
The G46 has the same flame as the G45. Its angled design hides the valve, creating more space for a larger burner. This burner only comes ANSI certified, and is compatible with most logs. The G46 is our recommended vented Real Fyre burner.
G31 Burner
The G31 has 3 pipes running across the burner, creating the tallest and most full-bodied flame of any other Real Fyre burner. It provides more warmth than the G4, G45 and G46. It can come ANSI certified or match lit.
G52 Burner
The G52 features 2 pipes running across the burner and a stainless steel "booster grid" that acts as a catalyst to create a more intense flame. It provides more heat than any other burner. The controls are positioned under the burner, creating more space for a larger burner. It can come ANSI certified or match lit.
P45 Burner
The P45 has the same "T" burner design as the G4, G45, and G46. It can be used with certain logs, glass, or shapes.
Pan Burner
The pan burner is designed to allow flames to cover the entire pan. It is ideal for see thru peninsula or island fireplaces. It can come ANSI certified or listed, and can be used with certain logs, glass, or shapes.
Epic Burner
The epic burner is ideal for commercial applications, such as a restaurant or hotel. It is only compatible with the mammoth pine log set.
G8 Burner
The G8 can come in a standard or a low BTU design, making it ideal for small bedrooms or bathrooms. It features one pipe in the center of the burner.
G9 Burner
The G9 features three separate flames across the burner. It provides more warmth than the G8.
G10 Burner
The G10 features three separate flames across the burner, and a "T" shaped ember bed that gives the illusion of the logs glowing red hot. It is exclusive to charred logs, and available in stainless steel. The G10 is our recommended vent-free burner.
G18 Burner
The G18 features 2 or 3 separate flames across the burner depending on set size. It provides the most warmth out of all vent-free burners. It has two decorative wood chunks that cover the front sides of the burner, and is exclusive to Evening Fyre logs.
G19 Burner
The G19 features two separate flames across the burner and a front log that glows like a real wood fire. It is exclusive to Foothill Oak logs.
