Menu
Menu
Your Cart
Cart0 item(s) - $0.00 0

  • Your shopping cart is empty!

Real Fyre G52 Radiant Fyre Burner

In Stock
Real Fyre G52 Radiant Fyre Burner
Real Fyre G52 Radiant Fyre Burner
0 reviews - Write a review
$866.70
$963.00
  • Stock: In Stock
  • Model: G52
  • MPN: G52-18/20

Available Options

Add to Cart
Add to Wish List Compare this Product

The Real Fyre G52-18/20 Radiant Fyre Burner is engineered to deliver intense flames and radiant heat in a mid-size vented fireplace. Its dual-tiered burner design creates a tall, full-bodied fire while using fewer BTUs than comparable systems. At the heart of the G52 is an exclusive stainless steel booster grid, which enhances the flame and increases the glow of the logs for a richer, more realistic presentation.

Sized for 18/20-inch fireplaces, the G52 produces up to 46,000 BTUs with natural gas or 36,000 BTUs with propane, giving it strong performance in medium enclosures. It is designed for use with premium Real Fyre log sets including Charred Evergreen Oak, Charred Evergreen Split Oak, Colonial Oak, and Burnt Aspen, each carefully crafted for lifelike detail. White sand (for NG) or vermiculite (for LP), along with glowing embers, are included to complete the ember bed effect.

Control flexibility is another hallmark of the G52-18/20. It can be installed as a basic match-lit system (NG only) or ordered with multiple valve configurations, including manual standing pilot (-A), millivolt standing pilot with variable flame remote (-17), or electronic IPI systems with remote control (-2VT, -02). With its combination of radiant heat output, versatile controls, and RH Peterson’s craftsmanship, the G52-18/20 Radiant Fyre Burner is a dependable centerpiece for traditional vented fireplaces.

Product Details
CertificationANSI certified vented burner system; approved in multiple control configurations.
BTUsNatural Gas: 46,000 BTUs; Propane: 36,000 BTUs
Burner TypePremier Series G52 Radiant Fyre Burner with a dual-tiered burner, stainless steel booster grid, and hidden controls.
Fireplace LocationIndoor vented fireplaces, 18/20-inch size.
Ignition TypeAvailable in multiple configurations: match-lit (NG only), manual standing pilot (-A), millivolt standing pilot with variable flame remote (-17), and electronic IPI systems with remote (-2VT, -02).
MaterialDurable burner construction with stainless steel booster grid; includes white sand (NG) or vermiculite (LP) and glowing embers.
Venting TypeVented indoor burner system; requires a fully vented fireplace with a working chimney or flue.

Match Lit

Match lit burners are available in natural gas only. They are lit by turning the gas flow on with your key valve and tossing a match or an equivalent flame source near the burners gas supply. You can control the flame height by adjusting your key valve.

Manual Valve Standing Pilot

This features a safety pilot light that is lit and remains on constantly. To turn on the burner, you would turn the control knob to allow for a heavier gas flow. This knob can also be used to control the flame height.

Basic on/off remote

This control type includes a safety pilot, a remote and a remote receiver. The remote has the ability to turn the flame on and off while keeping the pilot lit. There is no way to adjust the flame height in intervals.

Basic on/off Remote Variable Flame

This control type includes a safety pilot, a remote and a remote receiver. The remote has the ability to turn the flame on and off while keeping the pilot lit. Both the remote and the knobs on the valve can adjust the flame height.

Basic on/off RemoteLow Profile, Variable Flame

The only differences between this control type and Basic On/Off Remote, Variable Flame is that it is smaller and lower to the ground, and does not include a decorative cover.

Basic on/off RemoteElectric, Variable Flame

This features a non standing pilot with electric ignition. The pilot is ignited electrically via the remote, which then ignites the burner. When it is lit, the pilot goes out. The remote and remote receiver are battery operated, and there is no way to adjust the flame height.

Basic on/off RemoteElectronic, Variable Flame

The only difference between this control type and Electric Basic On/Off Remote is that the flame height is controllable via the remote.

Vented Refractory Gas Logs

Lifetime warranty for indoor use. Three (3) year warranty for outdoor use.

Vented Fiber-Ceramic Blended Gas Logs

Five (5) year warranty for indoor use. Three (3) year warranty for outdoor use.

Indoor Gas Log Burners & Stainless Steel Burners (excluding controls)

Ten (10) year warranty.

Outdoor Stainless Steel Burners (excluding controls)

Five (5) year warranty.

SPK-26

Three (3) year warranty.

APK-17 (including -17 valve)

Two (2) year warranty.

All Other Valves, Pilots & Controls (excluding batteries)

One (1) year warranty.

Glass, Gems & Nuggets

Ten (10) year warranty.

Write a review

Please login or register to review